– 23 –
Auto O
The Auto On/Auto O times shown in Client parameters allow the user to set a useable time frame for the
oven. If the oven is outside of these times, the oven will shut down automatically.
NOTE: This feature can be disabled by setting both values to 12:00AM.
Example #1: The default ON value of 12:00AM and OFF value of 10:00PM allows the oven to be used
from 12am to 10pm.
ON OFF
12AM 1AM 2AM 3AM 4AM 5AM 6AM 7AM 8AM 9AM 10AM 11AM 12PM 1PM 2PM 3PM 4PM 5PM 6PM 7PM 8PM 9PM 10PM 11PM
Example #2: ON value of 5:00AM and OFF value of 6:00PM allows the oven to be used from 5am to 6pm.
OFF ON OFF
12AM 1AM 2AM 3AM 4AM 5AM 6AM 7AM 8AM 9AM 10AM 11AM 12PM 1PM 2PM 3PM 4PM 5PM 6PM 7PM 8PM 9PM 10PM 11PM
When the oven is ON and reaches the Auto OFF
time the following “Auto O” screen (Fig. 41)
will appear with an audible alarm. To continue
to use the oven, press YES and enter the Client
password (Default: 0000) and press the green
check mark (Fig. 42). This will allow the oven
to operate for another hour. After an hour the
“Auto O” screen (Fig. 41) will reappear asking
if you would like to continue using the oven.
If you are done using the oven you can turn
the oven o.
If ve minutes has expired on the “Auto O” screen (Fig. 41) the screen the
right (Fig. 43) will appear. If you are done using the oven, turn the oven o.
To use the oven again turn the oven o and back on.
Fig. 41 Fig. 42
Fig. 43
To Next Page
Loading...
