baxter ML-132577 User Manual

– 32 –
F. To close the glass door, simply push shut.
G. To close handle, the lock mechanism needs to be in the
unlock orientation (Fig. 57).
NOTE: If lock is not in the unlock orientation, pull lock pin
out and rotate lock to the unlock orientation.
H. Place lock box over hex bolt and slowly push
handle into door (Fig. 57). Check to see
if the handle latch engaged by opening door
(Fig. 52). Repeat if necessary.
Inspect Air Louvers
1. Check air louvers (shutters) (Fig. 58) inside oven and
tighten any loose screws.
2. Check oven interior and tighten or replace loose or missing
panel screws. Also check oor anchors.
Inspect Cavity Vent
1. Check cavity vent for proper operation.
A. Touch Vent button (Fig. 59) on the control panel to
open vent and then touch VENT again to close vent.
B. Visually check that vent opens (Fig. 60) and closes
(Fig. 61) when button is touched.
C. Check that vent gasket is intact.
Visually Inspect Electrical Connections
1. Inspect all wiring connections for discoloration. If discoloration is visible, contact your local Baxter
authorized service o󰀩ce.
Fig. 59
Fig. 60
Vent Open
Fig. 61
Vent Closed
Fig. 58
Shutters
Fig. 57
Lock Pin
Hex Bolt
Lock Box

baxter ML-132577 Specifications

General

Brand	baxter
Model	ML-132577
Category	Oven
Language	English