Bay Tek Games Quick Drop - Troubleshooting - Monitor and Buttons; Menu Button Functionality Issues; Monitor Display Problems

31
TROUBLESHOOTING GUIDE
Menu Buons do not work. Disconnected, loose or broken wires.
Faulty buon.
Faulty communicaon between motherboard and
Mini gen.
Monitor shows “No Signal” Faulty power supply  Check for 12 Volts and blink
ing green LED on SATA Drive
Monitor cable unplugged
Faulty or loose RAM
Power game down, wait 10 seconds, then power
game ON to reset.
Monitor does not power up Ensure power is plugged into back of monitor,
down to power strip.
Replace monitor.
Monitor shows ASROCK SETUP
UTILITY
SATA Drive unplugged from board or faulty