20
AXE MASTER SETUP
A5BOPH312
Attach Left and Right Pole Assemblies to the Safety Wall:
Locate both of the Pole Assemblies. They look similar, but the left one
has a 3 wire plug (Red, Yellow, Black) (Label 3) (Part # AAME29019-L)
The right one has a 2 wire plug (Yellow, Black)
(Label 4) (Part # AAME29019-R)
Important:
2 people are needed for installing the poles.
One person will hold the pole in position, the other person can
connect plug and insert bolts.
Position the left pole assembly (Label 3) (Part # AAME29019-L)
in position as shown,
Connect the 3 wire plugs together (CE29071 to CE29072) and feed
connected wires back down into hole.
Ensure the wires do not get pinched as you install the bolts.
Secure with 4 of the black ¼-20 X 1 Phillips head bolts
using a # 3 Phillips Head bit.
3
4
Again, with one person will hold the right pole in position,
the other person can connect plug and insert bolts.
Position the right pole assembly (Label 4) (Part # AAME29019-R)
in position as shown,
Connect the 3 wire plugs together (CE29063 to CE29065) and feed
connected wires back down into hole.
Ensure the wires do not get pinched as you install the bolts.
Secure with 4 of the black ¼-20 X 1 Phillips head bolts
using a # 3 Phillips Head bit.
A5BOPH312
To Next Page
Loading...
