MX87QD User’s Manual
58 MX87QD User’s Manual
Note: The C6/C7 power state will have a new minimum load spec of 0.05 Amps for the 12V2 rail. For
customer systems which do not use a PSU that meets Intel®’s minimum current load specifications,
Intel strongly suggests to disable the processors’ C6/C7 power states in your motherboard BIOS. When
the processor’s C6/C7 state is disabled, the next lowest power state will be C3 (Deep Sleep Mode) which
should be enabled.
2.4.5 SATA Configuration
Serial-ATA Controller(s) [Enable]
Enabled/Disabled Serial-ATA Controller 0
Configuration options: [Disabled] [Enabled]
SATA Mode [IDE]
Support IDE, AHCI or RAID mode
Configuration options: [Disable][IDE][AHCI][RAID]
To Next Page
Loading...