BCM RX67Q - Parallel Port Configuration

70
3.6.10 Parallel Port Configuration
Set Parameters of Parallel Port
Parallel Port Configuration
• Parallel Port [Enabled]
Enable or Disable Parallel Port.
Configuration options: [Disabled], [Enabled]
• Device Setting [IO=378h; IRQ=6]
• Change Setting [Auto]
Select an optimal setting for Super IO device.
Configuration options: [Auto], [IO=378h; IRQ=6], [IO=378h; IRQ=5, 6, 7, 9, 10, 11, 12], [IO=278h; IRQ=5, 6,
7, 9, 10, 11, 12], [IO=3BCh; IRQ=5, 6, 7, 9, 10, 11, 12]