BCM RX67Q - Page 83

83
• Wake on LAN1 from S5 [Disabled]
Configuration options: [Disabled], [Enabled]
• LAN2 Controller [Enabled]
Enable/Disable LAN1 Controller
Configuration options: [Disabled], [Enabled]
• LAN2 Option-ROM [Disabled]
Enable/Disable LAN2 boot option for legacy network devices.
Configuration options: [Disabled], [Enabled]
• Wake on LAN2 from S5 [Disabled]
Configuration options: [Disabled], [Enabled]
• Restore AC Power Loss [Power Off]
Specify what state to go to when power is re-applied after a power failure(G3 state).
Configuration options: [Power Off], [Power On], [Last state]
Audio Configuration
• Azalia HD Audio [Enabled]
Enable/Disable Azalia HD Audio
Configuration options: [Disabled], [Enabled]
• Azalia internal HDMI codec [Enabled]
Enable/Disable Azalia internal HDMI codec
Configuration options: [Disabled], [Enabled]
• Amplifier Gain (db) [15.3db]
Select the Amplifier Gain on header “JAMP1”.
Configuration options: [15.3db], [21.2db], [27.2db], [31.8db]