BD Veritor™ Plus Analyzer Instructions for Use
38
none
WALK AWAY MODE
REMOVE TEST DEVICE
INSERT
WHEN PROMPTED
Test device inserted at the
incorrect workflow step
during Walk Away operation
mode.
Current run aborted. Remove test device and
immediately restart the Walk Away test sequence. Insert
the test device after the display window prompt to do so.
none
TEST DEVICE
WAS REMOVED
REPEAT ASSAY
Test device was removed
before the test run was
complete during Walk Away
operation mode.
Current run aborted. The test must be repeated with a
new test device because the elapsed development time
of the assay is unknown.
Result Number Message Possible Cause(s) Corrective Action(s)
* outside of the United States contact your local BD representative
To Next Page
Loading...
