1
3
6
7
5
4
2
1
FALCON / FALCON XL
75.5678.04 20111104 Page 1 of 5
microwave doppler radar
24.125 GHz
< 20 dBm EIRP
< 5 mW/cm²
motion/movement
*FALCON: 13ft (W) x 16ft (D) @ 16ft; FALCON XL: 13ft x 6.5ft @ 8ft 2in
** 2.2 in/s (measured in the sensor axis)
12V to 24V AC ±10%; 12V to 24V DC +30% / -10%
50 to 60 Hz
< 2 W
relay (free of potential change-over contact)
42V AC/DC
1A (resistive)
30W (DC) / 60VA (AC)
red: detection state, parameter indication; green: value indication
*FALCON: 11.5ft - 23ft; FALCON XL: 6.5ft - 11.5ft
IP65
from -22F to 140F (-30 °C to + 60 °C)
5 in (D) x 4 in (W) x 3 3/4 (H); (127 mm (L) x 102 mm (H) x 96 mm (W))
0° to 180° vertical
ABS and polycarbonate
.88lbs (400 g)
33 ft (10 m)
R&TTE 1999/5/EC; EMC 2004/108/EC
Technology:
Transmitter frequency:
Transmitter radiated power:
Transmitter power density:
Detection mode:
Detection zone (typical):
Min. detection speed:
Supply voltage:
Mains frequency:
Max power consumption:
Output:
Max. contact voltage:
Max. contact current:
Max. switching power:
LED-signal:
Mounting height:
Degree of protection:
Temperature range:
Dimensions:
Tilt angles:
Materials:
Weight:
Cable length:
Norm conformity:
Do not cover the
sensor.
Specications are subject to change without prior notice.
* Other use of this device outside its permitted purpose cannot be guaranteed by the manufacturer.
** Measured in optimal conditions
1. push buttons
2. LEDS
3. front face
4. radar antenna
5. angle indication
6. bracket
7. cable
Avoid proximity to neon or
uorescent lamps or moving
objects.
Avoid vibrations.
Only open the sensor
when the cable needs to
be replaced.
INSTALLATION TIPS
TECHNICAL SPECIFICATIONS
DESCRIPTION
FALCON: for normal to high mounting 11.5 ft - 23 ft (3.5 - 7 m)
FALCON XL: for low mounting 7 ft - 11.5 ft (2 - 3.5 m)
FALCON / FALCON XL
Users Guide
Activation sensor for automatic industrial doors*
To Next Page
Need help?
General
