BEC MX-200 User Manual
Status
In this section, you can check the router working status, including Device Info, System Log, 3G/4G-
LTE Status, Statistics, DHCP Table, IPSec Status, PPTP Satus, L2TP Status, GRE Status, and
ARP Table.
Device Info
It provides brief status summary of the device.
Device Information
Model Name: Name of the router for identification purpose.
Firmware Version: Software version currently loaded in the router
MAC Address: A unique number that identifies the router
Data Time: Setup correct time on the MX-200 with your PC. Check on Time Zone section for more
configuration information.
System Uptime: Display how long the MX-200 has been powered on.
Physical Port Status
Physical Port Status：Display available connection interfaces, WAN (3G/4G-LTE, EWAN) and LAN
(Ethernet) are supported in the MX-200.
WAN
Interface: List current available WAN connections.
Protocol: Display selected WAN connection protocol
Connection: The current connection status.
IP Address: WAN port IP address.
Default Gateway: The IP address of the default gateway.
LAN
To Next Page
Loading...
