BEC MX-200 User Manual
3.1 Select an appropriate WAN connection protocol then click NEXT to continue.
3.2(1) If selected 4G LTE
Input all relevant 3G/4G-LTE parameters from your ISP.
Click Next to continue.
3.2(2) If selected EWAN(LAN1) / PPPoE, please enter PPPoE account information provided by your
ISP.
Click NEXT to continue.
Step 4 – Quick Start Completed
The Setup Wizard has completed. Click on BACK to make changes or correct mistakes. Click NEXT to
save the current settings and complete the Quick Start setups.
Go back to the Status > Device Info to view the status.
To Next Page
Loading...
