Becker Centronic SunWindControl SWC62 User Manual

Centronic SunWindControl
SWC62
Becker-Antriebe GmbH
Friedrich-Ebert-Straße 2-4
35764 Sinn/Germany
www.becker-antriebe.com
de
Montage- und Betriebsanleitung
Sonnen-Wind-Steuergerät ohne Sensor
Wichtige Informationen für:
• den Monteur / • die Elektrofachkraft / • den Benutzer
Bitte entsprechend weiterleiten!
Diese Originalanleitung ist vom Benutzer aufzubewahren.
en
Assembly and Operating Instructions
Sun/wind control unit without sensor
Important information for:
• Fitters / • Electricians / • Users
Please forward accordingly!
These instructions must be kept safe for future reference.
fr
Notice de montage et d’utilisation
Appareil de commande soleil/vent sans capteur
Informations importantes pour:
• l'installateur / • l'électricien / • l'utilisateur
À transmettre à la personne concernée!
L'original de cette notice doit être conservée par l'utilisateur.
nl
Montage- en gebruiksaanwijzing
Zon-wind-besturing zonder sensor
Belangrijke informatie voor:
• de monteur / • de elektricien / • de gebruiker
Aan de betreffende personen doorgeven!
De gebruiker dient deze originele gebruiksaanwijzing te bewaren.

Becker Centronic SunWindControl SWC62 Specifications

General

Brand	Becker
Model	Centronic SunWindControl SWC62
Category	Control Unit
Language	English

Summary

Safety and Intended Use

Specific Safety Cautions

Highlights risks of injury due to electric shock and small parts.

Assembly and Connection

Connection Configurations

Drive Controller Wiring

Illustrates the electrical connections for using the SWC62 as a drive controller.

Group Controller System Wiring

Shows the wiring configuration for controlling multiple drives as a group.

Sensor Integration

Supported Sensor Types

Sensor Connection Diagram

Shade Time Programming

Defining Standard Shade Time

Explains how to set programmable extend and retract times for sun protection based on solar sensor input.

AUTO Shade Time Programming

Defining AUTO Shade Time Parameters

Explains how to set time frames for sun-dependent control to prevent early/late operation.

Expert Mode, Commissioning, and Defaults

Initial Unit Commissioning

Guides through the initial commissioning process, including language selection.

Resetting to Factory Defaults

Programming Procedures

Menu Navigation Flowchart

Setting the Time and Date

Step-by-step instructions for setting the current time and date on the control unit.

Program Type Selection

Weekly, Block, and Individual Programs

Explains how to set shade times for weekly, block, or individual day schedules.

Sun and Delay Parameter Settings

Configuring Sun Threshold Values

Details how to adjust sun values for automatic sun protection activation.

Setting Delay Times for Commands

Explains how to set delay times for sun-dependent extend and retract commands.

Wind and Time-Based Position Settings

Wind Monitoring Threshold Configuration

Guides on setting wind speed thresholds for protection.

Time-Based Intermediate Position Setup

Sun-Based Position Settings

Sun-Based Intermediate Position Configuration

Setting Intermediate Positions

I-Intermediate Position Setup and Deletion

Details how to set, move to, and delete the first intermediate position.

II-Intermediate Position Setup and Deletion

Details how to set, move to, and delete the second intermediate position.

Troubleshooting Guide

Common Problem Resolution

Offers solutions for common problems like non-functioning drives, incorrect direction, and unexecuted commands.