Becker MAP PILOT Operating Guide

12
GENERAL OPERATION >>>
> EN
Memory card
Your Becker® MAP PILOT has a slot for
an SD memory card. This slot is used for
additional maps that can be purchased via
the Becker Content Manager/Webshop.
The card slot is located on the right side of
the Becker® MAP PILOT. The card slot
is equipped with a spring-actuated locking
and ejector mechanism.
Basic operation
The Becker® MAP PILOT is operated
using a number of the controls of the in-
stalled audio system.
Route guidance instructions are also dis-
played in the instrument cluster of the ve-
hicle.
Calling up navigation mode
> Press the button on the
audio system.
Navigation mode is called up.
Selecting/highlighting elements
To operate the Becker® MAP PILOT
you must select or highlight menu items.
This is done using the rotary control/push
button of the installed audio system. Turn
the rotary control/push button to toggle
between the various menu items. This op-
erating manual describes the process of
highlighting.
To select a menu item, you must first turn
the rotary control/push button to high-
light the item and then press the rotary
control/push button.
Back function
At all menu levels you can return to the
previous menu level by pressing the
L button.
During route guidance (route guidance is
active), pressing the
L button brings
you back to the main menu.
CAUTION
The SD memory card is removable. Keep
away from small children as it could be
swallowed.
Note:
To exit the Navigation mode, press the
corresponding button on the audio sys-
tem.
NAV
I
Note:
The rotary control/push button can also
be moved in 8 different directions. This
is dealt with separately in the guide.
Note:
The
L is located to the left of the ro-
tary control/push button.

Becker MAP PILOT Specifications

General

Connectivity	USB
Voice Guidance	Yes
Bluetooth	No
Compatibility	Mercedes-Benz vehicles
Features	Speed limit display
Update Method	USB