38
NAVIGATION MODE >>>
> EN
Route
> In the Map Toolbox, select Route.
The route menu is displayed.
Enter/delete stopover.
With this function, you can enter or
delete a stopover.
> In the route menu, select
Add
stopover
.
As described in “Destination input” on
page 20, you can now enter a destination
as a stopover. You can also select from
recent stopovers by selecting
Select from
last destinations
.
Once you've entered the desired stopover,
the new route is calculated.
The entered stopover is indicated on the
map with a red flag.
Delete stopover.
> In the route menu, select
Delete
stopover
.
The stopover is deleted. The route is
recalculated
TMC on your route
You can view and process TMC messages
that appear on your route.
> In the route menu, select
TMC on route.
TMC messages that appear during your
route are displayed.
After selecting a message, you can decide,
for example, whether or not you would
like to be redirected around the traffic
obstacle. View the description in “Traffic
announcements using TMC” on page 32.
Note:
The following functions are only
available during active navigation.
Note:
The TMC messages that led to route
adjustments are also displayed.
Note:
If automatic adjustment was set in
“TMC settings” on page 49, you will not
be able to decide whether or not you
would like to be redirected.
To Next Page
Loading...
Need help?
General
