Becker MAP PILOT Operating Guide

50
SETTINGS >>>
> EN
System settings
You can change various basic settings for
the Becker® MAP PILOT.
> In the settings menu, select
System
settings
.
The system settings are displayed.
Language
You can set the menu language and the
language for the navigation announce-
ments.
> Select
Language in the system settings.
> Select the desired language.
You can now choose the type of voice (e.g.
male or female voice) for some languages.
> Select the desired voice.
Design variants
You can choose between two different
design variants for displaying the day
design.
> Select
Design variants in the system
settings.
> Select the desired variant.
Pin protection
You can create a freely definable security
code of between 4 and 10 digits in length
and enable/disable this security code.
> Select
PIN protection in the system set-
tings.
> Select
Enable PIN to enable a security
code.
> Enter the desired security code and con-
firm your entry with .
> Enter the security code again and con-
firm your entry with .
The security code is now enabled.
Select
Disable PIN to disable a security
code.
> Enter the correct security code and con-
firm your entry with .
The security code is now disabled.
Note:
When a security code is entered, your
Becker® MAP PILOT is linked with
your vehicle by means of this security
code. If your Becker® MAP PILOT is to
be used in a different vehicle, the security
code must be entered.
For the entry or change of the security
code, the ignition of the vehicle must be
turned on.

Becker MAP PILOT Specifications

General

Connectivity	USB
Voice Guidance	Yes
Bluetooth	No
Compatibility	Mercedes-Benz vehicles
Features	Speed limit display
Update Method	USB