EasyManuals Logo

Becker MAP PILOT Operating Guide

Becker MAP PILOT
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
16
GENERAL OPERATION >>>
> EN
Content Manager Becker®
MAP PILOT
The Content Manager Becker® MAP
PILOT is a PC based application contain-
ing a number of important functions to
help you manage the content on your
Becker® MAP PILOT.
With the Content Manager Becker®
MAP PILOT you can:
back up the content saved on the
Becker® MAP PILOT to your PC and
restore it later to your Becker® MAP
PILOT,
download current content from the In-
ternet and install it on the Becker®
MAP PILOT.
To use the Content Manager Becker®
MAP PILOT, you will need the USB ca-
ble provided as well as a computer that
meets the following minimum require-
ments:
Microsoft Windows XP (SP2), Vista or
Windows 7 operating system
Microsoft Internet Explorer 7 or higher
•PC with USB 2.0
Fast Internet connection with more
than 2 Mbit/s
At least 10 GB hard disk space.
Installing the Content Manager
Becker® MAP PILOT
You can install the Content Manager
Becker® MAP PILOT on your computer
with the following steps:
> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
Installation should start automatically.
> Follow the instructions of the software.
The Content Manager Becker® MAP
PILOT can be started immediately after
installation.
This completes the installation procedure.
Starting the Content Manager
> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
> Click on
Start > All Programs on the
computer.
> Select
Content Manager.
> Click on
Content Manager.
The Content Manager Becker® MAP
PILOT is started.
Note:
When you connect the Becker® MAP
PILOT to the PC for the first time, the
PC installs all the necessary drivers and
then displays the message "Your unit is
now ready to use".
Note:
If installation does not start
automatically, start the Setup.exe file in
the “Content Manager” directory on the
removable storage medium.

Table of Contents

Other manuals for Becker MAP PILOT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Becker MAP PILOT and is the answer not in the manual?

Becker MAP PILOT Specifications

General IconGeneral
ConnectivityUSB
Voice GuidanceYes
BluetoothNo
CompatibilityMercedes-Benz vehicles
FeaturesSpeed limit display
Update MethodUSB

Related product manuals