Becker MAP PILOT Operating Guide

29
>>> NAVIGATION MODE
> EN
Depending on the position of the cross-
hair pointer, a list of potential destina-
tions, an address or geocoordinates is dis-
played. When TMC message symbol
appears in the cross-hair pointer, it is also
displayed in the list. By selecting it in the
list, you can pull up the message details.
> Select the desired entry from the list.
> Select
Start guidance to begin route
guidance to the destination straight
away.
Coordinate entry
You can also enter your destination using
geographical coordinates.
> Select
Enter geo-coordinates from the
destination input menu.
> Select to set the direction required
for the geographic latitude.
> From the numbers indicated by se-
lect the required numbers.
> Select .
> Enter the geographical longitude as de-
scribed earlier.
Where possible, an address matching the
coordinates will be displayed.
> Select
Start guidance to begin route
guidance to the destination straight
away.
Note:
Push the rotary control/push button to
the right for further control options.
Notes:
By selecting you can switch from de-
gree to decimal input and vice versa.
1
2
3
1
2
3
Note:
Push the rotary control/push button to
the right for further control options.

Becker MAP PILOT Specifications

General

Connectivity	USB
Voice Guidance	Yes
Bluetooth	No
Compatibility	Mercedes-Benz vehicles
Features	Speed limit display
Update Method	USB