Becker MAP PILOT Operating Guide

41
>>> NAVIGATION MODE
> EN
Simulate route
You can start a simulation of the route.
> When the entire route is displayed,
select
Options.
> Select
Simulation.
The route is simulated at four times the
usual speed.
By pressing the button you are
brought to the next action event.
By pressing the
L button, the
simulation is stopped.
Block a route section
You can block a section of the route
ahead. You thereby set specific sections
that should not be driven. From Becker®
MAP PILOT, a detour calculation will be
attempted.
> In the route menu, select
Block ahead.
> By turning the rotary control/push
button you can select the starting point
of the block.
> Press the rotary control/push button to
confirm the starting point.
> By turning the rotary control/push
button you can now select the end point
of the block.
> Press the rotary control/push button to
confirm the end point.
> Select
Yes to activate the block.
The block is activated and the new route
is calculated.
C
Note:
• Destination navigation is stopped
during section selection.
• The maximum length of a section is 50
km (31 mi)
• During the section selection, you can
go back to the current point by
pressing the
L button.

Becker MAP PILOT Specifications

General

Connectivity	USB
Voice Guidance	Yes
Bluetooth	No
Compatibility	Mercedes-Benz vehicles
Features	Speed limit display
Update Method	USB