34 WAVE User Manual
MSB LSB 14-bit Parameter Name Range Notes
0 43 43 CLK 0-34 Arp/Seq - Clock Selection
0 44 44 GAT 1-99 Arp/Seq - Gate Time
0 45 45 DIV 0-6 Arp/Seq - Sequencer Time
0 46 46 BPM 40-240 Arp/Seq - Speed (MSB/LSB)
Notes:
Data change commands (RX & TX)
1. Bn 63 00
2. Bn 62
ParNum
3. Bn 06
Value
(n = MIDI Chan. (0 - 15)
ParNum
= 0 - 37
Value
= 0 - 127)
Bank Select (RX & TX)
1. Bn 00 00
2. Bn 20
BankNum
(n = MIDI Chan, (0 - 15)
BankNum
= 0 or 1)
All numbers are in HEX format.
SysEx
This section describes how the Wave responds to SysEx commands. Note that all
numbers are Hex.
SysEx Data Format
MIDI SysEx transmissions always begin with data 0xF0, end with 0xF7.
WAVE Data Structure of MIDI SysEx Messages
F0 Manu ID Model ID Device ID PKT SPKT Data F7
Description of SysEx structure
Field (Hex) Description
F0 System exclusive start.
00 20 32 Manufacturer ID (Behringer GmbH)
00 01 39 Model ID (WAVE)
Device ID Always '0' for the WAVE
PKT Packet Type
SPKT Sub Packet Type (SPKT is absent for some packets)
Version Data Package Version Byte (currently 0x0)
Data Payload of packet
F7 End of system exclusive
SysEx Preset Data
Byte Group Menu Parameter Name Range Notes
0-15 NAME PRESET NAME 32-126 16x ASCII Character Bytes
16 PROGRAM WAVETB 0-127 Wavetable (32-127 = User TR/WT)
17 PROGRAM SPLIT 0-99 Split Point
18 PROGRAM KEYB 0-9 Keyboard Mode
19 A TUNING DETU 0-9 Sub Osc Detuning
20 A TUNING MO 0-1 Mod -> Main Osc Pitch
21 A TUNING MS 0-1 Mod -> Sub Osc Pitch
22 A TUNING EO 0-1 Env3 -> Main Osc Pitch
23 A TUNING ES 0-1 Env3 -> Main Sub Pitch
24 A TUNING SEMIT V1 0-63 Voice 1 - Semi Oset
25 A TUNING SEMIT V2 0-63 Voice 2 - Semi Oset
26 A TUNING SEMIT V3 0-63 Voice 3 - Semi Oset
27 A TUNING SEMIT V4 0-63 Voice 4 - Semi Oset
28 A TUNING SEMIT V5 0-63 Voice 5 - Semi Oset
29 A TUNING SEMIT V6 0-63 Voice 6 - Semi Oset
30 A TUNING SEMIT V7 0-63 Voice 7 - Semi Oset
31 A TUNING SEMIT V7 0-63 Voice 8 - Semi Oset
32 A ANALOG DELAY 0-127 LFO Delay
33 A ANALOG WAVESHAPE 0-127 LFO Shape
To Next Page
Loading...
