Behringer WAVE - Global Sysex

37 WAVE User Manual
Global SysEx
Byte Parameter Range Synth Tribe Notes Parameters
0 MIDI 0-16 YES MIDI Channel 0 = o
1 TTUNE 0-99 YES Tuning: 400-499 Hz 
2 SYSEX 0/1 NO SysEx RX/TX on/o
3 LOCAL 0/1 YES Local on/o
4 EXP_PED 0-5 YES Expression Pedal Mode (see Table)
5 TOUCH 0-3 YES Channel Aftertouch Mode (see Table)
6 BRT 0-99 YES LCD Brightness 
7 CNT 0-99 YES LCD Contrast 
8 PAR-COM 0-3 YES Edit Parameters MIDI RX/TX (see Table)
9 FIRM 0/1 YES Firmware Enhancements on/o
10 OSC 0/1 YES Oscillator Enhancements on/o
11 LFO 0/1 YES LFO Enhancements on/o
12 MOD 0-2 / 11-15 / 21-25 YES Arp/Seq Mode (see Table)
13 CLK 00-03 / 12/22/30-33 YES Clock Source and Rate (see Table)
14 GAT 1-99 YES Gate Time (see Table)
15 DIV 0-6 YES Clock Division (see Table)
16 BPM (MSB) 40-240 YES Tempo (Bits 8-13) 
17 BPM (LSB) 40-240 YES Tempo (Bits 0-7) 
18 MTN 0/1 YES Metronome mode on/o
19 OVP 00/01/10/11 YES Overdub & Transpose modes (see Table)
EXP_PED Parameters
0 O
1 Loudness
2 VCF-Cuto
3 VCF-Emphasis
4 Wavetable Position
5 Modulation Wheel
Par-Com
0 O
1 Sound Paramater TX
2 Sound Parameter RX
3 Sound Parameter TX & RX
CLK
Value = Mode + 10*Clock_Rate
Mode Clock Rate
0 = Internal 0 = 1 ppqn
1 = DIN MIDI 1 = 2 ppqn
2 = USB MIDI 2 = 24 ppqn
3 = Analog Trigger 3 = 48 ppqn
OVP
Value = Overdub + 10*Key_Transpose
Overdub Key_Transpose
0 = Disabled 0 = Enabled
1 = Enabled 1 = Disabled
Touch
0 O
1 MIDI TX
2 MIDI RX
3 MIDI TX & RX
MOD
Value = Mode_A + 10*Mode_B
Mode_A Mode_B
0 = Sequencer (0 when Mode_A=0)
1 = Arpeggiator 1 1 = Up
2 = Arpeggiator 2 2 = Down
3 = Up & Down
4 = Random
5 = Moving