GB Double Sound Speed Controller SFR-1-D
4 BEIER-Electronic 01.03.2020
Introduction
The SFR-1-D is a multifunction all-rounder module, designed for RC models with two
brushed DC motors, such as tracked vehicles and ships.The module combines the
functions of the sound module USM-RC-2 and the speed controller UFR-1230-D.
Thanks to various setting options the SFR-1-D can be easily adjusted to all model
requirements and driving behaviours.
The SFR-1-D comes with a large light control unit, eight proportional channels, four
servo outputs, two mini speed controller for auxilliary drives and additional outputs
for a smoke generator, a Xenon flasher and an IR battle unit.
For an easy start we have more than 90 ready to use sound projects and 700 sound
files for different types of models. Own recordings can also be used.
Sound functions:
Sounds can be selected for following areas:
• Driving and engine sounds (speed-dependent)
• Additional sounds (e.g. horns, hydraulic and compressed air noises)
• Random sounds (e.g. squeaking, animal and ambient sounds)
Driving functions:
Brushed motors (DC) can be controlled smooth and realistic with the SFR-1-D. An
ideal driving behavior can be achieved through a variety of settings.
The speed controller on the SFR-1-D has following characteristics:
• Different dual mixer
• Different brake functions (with hand- and emergency brake)
• Adjustable load regulation
• Adjustable mass inertia
• Adjustment of throttle curve for different driving behaviours
Light functions:
To realize different light effects, the module comes with 16 switching outputs to
connect LEDs, lamps and other consumers. Light functions, such as low beam, rear
light, brake light, indicator lights, warning lights, flickering lights, etc. can be easily
implemented and controlled.
All light functions can be activated or deactivated automatically with sounds and
movements.
Servo movements:
With four additional servo outputs, movements can be realised and equipped with
sound.
To Next Page
Loading...