GB Double Sound Speed Controller SFR-1-D
01.03.2020 BEIER-Electronic 59
Configuration – Speed Controller – Motor M3 + M4
Different settings for auxiliary drives can be configured here. M3 and M4 can be
labeled with an own name.
Two options are available to control M3 and M4:
Control motor via function „left / right“
With this function, the motor has a fix speed level between 10 and 100 %. With the
functions „Motor M3/M4 left/right“ the motor is accelerated (left or right) to the set
speed level. Hence, the motor has 3 conditions: turning left / stop / turning right.
With this setting no complete prop. channel is used. It is also possible to activate the
motors with a nautic/multiswitch or the bluethooth app SFR-1-D controller. However,
it is not possible to control the motor speed proportional and steplessly.
Control motor via one proportional channel
With this setting the speed of motor M3 and M4 can be controlled proportional and
steppless with any SFR-1-D prop. channel.
In additional sound a sound for M3 and M4 can be set. The sound is played
automatically as long as the motor is turning.
To Next Page
