GB Double Sound Speed Controller SFR-1-D
01.03.2020 BEIER-Electronic 65
Configuration - S-BUS / SUMD
S-BUS / SUMD
If sum signals should be used, they must be activated here. The sum signal channel
of the receiver is connected to proportional channel #8 (X2/8) of the SFR-1-D. The
proportional channels of the SFR-1-D can be assigned to the sum signal channels
(see also page 34).
Configuration - S-BUS / SUMD - Digital switches (only for Graupner SUMD3)
For the 64 digital switches of the sum signal SUMD3, the desired functions can be
assigned here. Please follow the instructions on page 35.
To Next Page
Loading...