GB Double Sound Speed Controller SFR-1-D
68 BEIER-Electronic 01.03.2020
Configuration - EKMFA
If you want to use EMKFA mode, you have to activate it first.
The used functions for EKMFA mode (see page 33) can be configured here.
Of course, you don’t have to assign every position (2 x 15 positions).
Activation delay
Certain times can be set that determine how long the joystick or switch must be in
the positions A/D and B/C in order to activate the corresponding functions. Times
between 10 and 2500 ms are possible.
The reset button will restore the standard values.
To Next Page
Loading...