GB Sound module USM-RC-3
68 BEIER-Electronic 11.10.2021
WAV-Player
The WAV-Player setting can be configured here. You can choose whether the next
track should start automatically after finishing the previous track or the playback
should stop.
Bluetooth controller:
If you want to control the USM-RC-3 via the Android app "SFR-1 Controller" with the
Bluetooth module BTC-1, this must be activated here. A 4-digit PIN protects the
model from being controlled by others. Only if the same PIN is set in the app, the
USM-RC-3 can be controlled with it. The default PIN is: 0000
Light module:
The protocol for the transmission to a light module in the trailer can be specified
here. There are 3 variants to choose from:
• Infrared protocol for the light modules SM-IR-16-2 and LM-IR-16-4. This
protocol works for both light modules, but is a bit slower in terms of
transmission speed (latency max. 140 ms).
• Infrared protocol for the light module LM-IR-16-4. This protocol does not work
with the light module SM-IR-16-2. But it is faster (latency max. 80 ms).
• Bluetooth protocol for the light module LM-BT-16-4. This is the fastest
protocol (latency max. 40 ms), but does not work with IR light modules.
To Next Page