7 Connect BFI-Tools to BFI-E3 through Ethernet
BFI-Tools can only communicate with one BFI-E3 at a time. How to set up the communication is:
- Choose way of communication with BFI.
1. Chose Ethernet Module.
2. Set the Local PC IP-adress to 192.168.1.x were 0 < x < 250
3. Re-Scan Network to find BFI-E3s in the network or tap in the IP-adress manually
4. All BFI-E3 available in the Network will appear.
5. Chose which BFI-E3 to communicate with. Then push connect to start up communication.
And after connection BFI-Tools works in exactly the same way as when using other ways of communication.
To Next Page
Loading...
Need help?
General
