24
Installation OCTOPUS OS3
Release
03
08/2020
1.4.4 Supply voltage with the characteristic value QQ
The supply voltage can be connected redundantly. Both inputs are
uncoupled. With a non-redundant supply of the supply voltage, the device
reports the loss of a supply voltage. You can prevent this message by
applying the supply voltage via both inputs, or by changing the configuration
in the Management.
A 5-pin, “L”-coded M12 plug is available for the redundant supply of the
device.
See “Device name and product code” on page 16.
1.4.5 Supply voltage with the characteristic value N9
The power is supplied via a 5-pin, “K”-coded M12 plug.
For information about the position on the device see chapter “Device views”
on page 18.
Further information:
See “Device name and product code” on page 16.
1.4.6 Supply voltage with the characteristic value M9
The power is supplied via a 5-pin, “K”-coded M12 plug.
For information about the position on the device see chapter “Device views”
on page 18.
Further information:
See “Device name and product code” on page 16.
To Next Page