Belden HIRSCHMANN OCTOPUS OS3 - Important Information; Safety Symbol Explanation; Safety Level Indicators

6
Installation OCTOPUS OS3
Release 03 08/2020
Important Information
Notice: Read these instructions carefully, and look at the equipment to
become familiar with the device before trying to install, operate, or maintain
it. The following special messages may appear throughout this
documentation or on the equipment. The message warns of potential
hazards or calls attention to information that clarifies or simplifies a
procedure.
 Symbol explanation
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
The additional of this symbol to a “Danger” or “Warning” safety
label indicates that an electrical hazard exists, which will result
in personal injury if the instructions are not followed.
This symbol points out the dangers posed by hot device
surfaces. In connection with safety notes, the disregard of these
instructions will result in injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided,
can result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.