33
G+ MIMO Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
1. User Name -Enter the user name� (Assigned by your ISP)�
2. Password - Enter your password� (Assigned by your ISP)�
3. Retype Password - Confirm the password� (Assigned by your ISP)�
4. Service Name (Optional) - A service name is rarely required by an
ISP� If you are not sure if your ISP requires a service name, leave
this blank�
Setting your ISP Connection Type to PPPoE or PPPoA
PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices� It requires a user name and password to
access the network of your ISP for connecting to the Internet� PPPoA (PPP over ATM) is similar to PPPoE, but is mostly implemented in the UK� Select
PPPoE or PPPoA and click “Next”� Then enter the information provided by your ISP, and click “Apply Changes” to activate your settings�
To Next Page
Loading...
