Belkin G+MIMO - Page 37

35
G+ MIMO Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
SettingyourConnectionTypetoDynamic/FixedIP(1483Bridged)
This connection method bridges your network and ISP’s network
together� The Router can obtain an IP address automatically from your
ISP’s DHCP server or accept a fixed IP address assigned by your ISP�
For Dynamic IP connection:
1. IP assigned by ISP - Select “Yes” if your ISP instructed you to use
Dynamic IP�
2. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here� These identifiers are assigned by
your ISP�
3. Encapsulation - Select LLC or VC MUX your ISP uses�
Click “Apply Changes” to save and activate your settings� To go back to
the original settings before saving, click “Clear Changes”; or click any of
the Quick-Navigation links for other options� Your new settings will not
be saved unless you click “Apply Changes”�