Belkin G+MIMO - Page 63

61
G+ MIMO Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
2. A window will open that allows you to select the location where you
want to save the configuration file� Select a location� You can name
the file anything you want, or use the default name “user�conf”� Be
sure to name the file so you can locate it yourself later� When you
have selected the location and name of the file, click “Save”�
3. When the save is complete,
you will see the window
below� Click “Close”�
4. The configuration is now
saved�