Bend-Tech Dragon A400 Startup Manual

Bend-Tech Dragon A400

32 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Revision 7 | English

Dragon A400

Part 1 of 3

Startup Manual

Part 1: Safety and Maintenance

©2022 Bend-Tech LLC

Table of Contents

Other manuals for Bend-Tech Dragon A400

Maintenance & Troubleshooting56 pages

Start-Up And Training Manual56 pages

Assembly Manual56 pages

Questions and Answers:

M
Mary WeaverAug 16, 2025
What to do if the gate jaws are not operating smoothly on Bend-Tech Control Systems?
- E
  Elizabeth MatthewsAug 16, 2025
  If the gate jaws on your Bend-Tech Control Systems are not operating smoothly, several factors could be at play. Start by cleaning the gate lead screws with brake cleaner or compressed air and remember to re-lubricate them. Also, clean the gate jaw rack using brake cleaner or compressed air. If the issue persists, the rack may be out of adjustment; in this case, remove the gate and adjust the gate jaws using the eccentric bearing. Lastly, check if the rack eccentric bearings are dirty and clean them with brake cleaner or compressed air.
D
danieljohnsonAug 19, 2025
How to fix a Bend-Tech Control Systems gate that is not operating smoothly?
- O
  oburkeAug 19, 2025
  If your Bend-Tech Control Systems gate isn't operating smoothly, it might be due to a dirty gate or an eccentric bearing that's out of adjustment. Try cleaning the gate with compressed air and/or brake cleaner. For extremely dirty gates, use a rag or toothbrush to help clean it. If cleaning doesn't solve the problem, remove the gate from the machine and adjust the eccentric bearing until there is no play and the gate spins smoothly.

Bend-Tech Dragon A400 Specifications

General

Brand	Bend-Tech
Model	Dragon A400
Category	Industrial Equipment
Language	English

Related product manuals

Preview: Bend-Tech Dragon mAchines

Bend-Tech Dragon mAchines