20 Bend-Tech Dragon A400
Startup Manual
Safety
01
1.6 Emergency Stops (E-Stops)
1.6.1 E-Stop Overview
There are four external emergency stop (E-Stop) buttons located on the Dragon A400
machine. There is one E-Stop on the Tail of the machine, one on the Trolley cover, and one on
each side of the Gate. These four emergency stops completely shut power o to all motors and
outputs. To re-enable the machine after pressing an E-Stop, the E-Stop must be disengaged
and power to the motors must be initialized by pressing the green light on the Control Box. If
the green light doesn’t initialize, this is an indicator that an E-Stop is still engaged. The green
light indicates the motors have power.
E-Stop
Locations
To Next Page
Loading...
