13Bend-Tech Dragon A400
Startup Manual
Safety
01
01
Safety
1.1 General Safety Notes
Read all warnings, cautions, and instructions before operating the Dragon machine.
Each company has dierent procedures. Always act in accordance with Environmental Health
& Safety (EHS) standards set in place regarding the facility in which the Dragon A400 is being
operated.
Follow basic safety precautions to reduce the risk of injury or mechanical damage. CNC
metal working machines such as the Bend-Tech Dragon machines introduce hazards to the
workplace. It is the responsibility of the operator to take appropriate safety measures regarding
the potential hazards of this machine, and not the responsibility of Bend-Tech, LLC.
Maintaining a clean machine is important during normal use as well as prior to and after
servicing the machine. Cleaning procedures may require Personal Protective Equipment (PPE)
beyond the scope of daily operation procedures of the machine.
Read all parts of the Startup manual in their entirety to ensure safe and ecient operation of
the Dragon A400 machine.
This manual is a reference guide for the Dragon A400 and is not a comprehensive source of
operating or training information. A complete training course and support can be requested
from Bend-Tech, LLC, www.bend-tech.com.
To Next Page
Loading...
