Bend-Tech Dragon A400 - Contents

vBend-Tech Dragon A400
Startup Manual
Contents
2.3.6 Clean and Re-lubricate the Roller
Bearings ...................... 27
2.4 Monthly or 150 Hours ............ 27
2.4.1 Check the Fasteners ........ 27
2.4.2 Clean and Fill the Material
Cooling System Reservoir ........ 27
2.4.3 Check the Eccentric Bearings . 27
2.4.4 Check the Emergency Stops .. 28
2.4.5 Clean and Lubricate the
Racks ........................ 28
2.4.6 Check Backlash ............ 28
2.5 Quarterly or 500 Hours. . . . . . . . . . . 28
2.5.1 Clean Coolant Screens ...... 28
2.5.2 Grease Pillow Block Bearings . 28
2.5.3 Comprehensive Cleaning .... 28
2.6 Bi-Annually or 1000 Hours ........ 28
2.6.1 Clean the Chuck ........... 28
2.6.2 Check Level and Straightness . 28
2.7 Annually or 2000 Hours .......... 29
2.7.1 Check Rack Spacing ........ 29