Bend-Tech Dragon A400 - Movement; Material Securing; Pinch Points

19Bend-Tech Dragon A400
Startup Manual
Safety
01
1.4.4 Material Securing
Ensure that any material loaded into the machine is securely fastened in the Chuck and is
snug in the Gate.
! Warning !
Improperly secured material may cause injury.
1.5 Pinch Points
Use caution in the area of pinch points. There are many pinch point locations identied on the
Dragon A400 including the Gate assembly, Toolhead, Trolley and Material Support Lift. It is
advised to use caution in these areas and stay clear of them during machine operation.
Toolhead
movement
Front Gate
movement
Material Support
Lift movement
Where the Trolley
contacts the Rail
Chuck
movement
Where the Trolley contacts
the rear bumper