14 Bend-Tech Dragon A400
Startup Manual
Safety
01
1.2 Safety Procedures
1.2.1 Personal Protective Equipment (PPE)
Metalworking and metalworking operations can be dangerous. Using the proper PPE is
important to avoid injuries that can result from sparks, heat, noise, smoke and vapor, dropped
objects, and ultraviolet light. Consult local safety codes before operating the machine. Before
working on or near the machine, it is important to read this manual and fully understand the
safe operation of the machine. Contact Bend-Tech with any questions or concerns regarding
the safe operation of the Dragon A400.
It is recommended that the operator read the plasma torch operator’s manual and become
familiar with the hazards of working with the torch before operating it in conjunction with the
Dragon.
1.2.2 Machine Safety Labels
The following Safety Labels are found on the Dragon A400.
Back Plate
! Caution !
The Dragon A400 should only be operated by authorized and trained personnel. The
operator should always act in accordance with the Dragon A400 Startup safety procedures
and machine instructions for safe operation of this machine. Failure to follow these
guidelines may pose a hazard to personnel and the machine.
To Next Page
Loading...
