Bend-Tech Dragon A400 User Manual (English)

Other manuals for Bend-Tech Dragon A400

Questions and Answers:

Mary WeaverAug 16, 2025

What to do if the gate jaws are not operating smoothly on Bend-Tech Control Systems?

E
Elizabeth MatthewsAug 16, 2025
If the gate jaws on your Bend-Tech Control Systems are not operating smoothly, several factors could be at play. Start by cleaning the gate lead screws with brake cleaner or compressed air and remember to re-lubricate them. Also, clean the gate jaw rack using brake cleaner or compressed air. If the issue persists, the rack may be out of adjustment; in this case, remove the gate and adjust the gate jaws using the eccentric bearing. Lastly, check if the rack eccentric bearings are dirty and clean them with brake cleaner or compressed air.

danieljohnsonAug 19, 2025

How to fix a Bend-Tech Control Systems gate that is not operating smoothly?

O
oburkeAug 19, 2025
If your Bend-Tech Control Systems gate isn't operating smoothly, it might be due to a dirty gate or an eccentric bearing that's out of adjustment. Try cleaning the gate with compressed air and/or brake cleaner. For extremely dirty gates, use a rag or toothbrush to help clean it. If cleaning doesn't solve the problem, remove the gate from the machine and adjust the eccentric bearing until there is no play and the gate spins smoothly.

Brand

Model

Dragon A400