31Bend-Tech Dragon A400
Assembly Manual
Cables and Control Box
05
05
Cables and Control Box
5.1 Cable Pre-Installation
The Dragon A400 is delivered with the Cable Track rolled up and shrink wrapped at the front of
the machine, just behind the Trolley. The cables are pre-connected to the various components
on the Head of the Dragon A400.
The Installer will be required to unroll the Cable Track on the Cable Track Tray and route the
ends of the cables to the Control Box.
Tools Needed
• Utility Knife
•
Hardware Needed
• Hardware Bag No. 4
To Next Page
Loading...
