Bend-Tech Dragon A400 - Mounting to the Floor; Mounting Overview; Concrete Sleeve Anchors

51Bend-Tech Dragon A400
Assembly Manual
Mounting to the Floor
10
10
Mounting to the Floor
10.1 Mounting Overview
To maintain long-term precision of the Dragon A400, Bend-Tech requires the machine to be


10.2 Concrete Sleeve Anchors


󰀩
Tools Needed
• 7/16 in Concrete Bit
• 3 in. long, 3/8 in. concrete
anchor sleeves
• Hammer Drill
• Hammer
• 1/2 in. Socket
• Torque Wrench
• Shop Vac or Compressed Air