24 Bend-Tech Dragon A400
Assembly Manual
Beginning Assembly
03
3.9 Secure the Rail Support Legs
Allen head screws and T-nuts as outlined in section 3.6.2. Ensure the Swivel Levelers are
installed on the bottom of each leg as outlined in section 3.5.
3.10 Secure the Rail Sections
fasteners from Hardware Bag No. 3. Ensure the Rail sections are aligned with each other with
no gaps or edges protruding.
3.11 Tighten the Rail Beam Fasteners
With the Rails tightened to the Rail Beams, the Rail Beams can now be tightened to the Rail
Support Legs. Tighten these securely by hand.
3.12 Belt Track Guide
Tools Needed
•
Hardware Needed
• Hardware Bag No. 3
Tools Needed
•
Hardware Needed
• Hardware Bag No. 3
To Next Page
Loading...
