Bend-Tech Dragon A400 - Tools and Equipment; Tools; Tool List

13Bend-Tech Dragon A400
Assembly Manual
Tools and Equipment
02
02
Tools and Equipment
2.1 Tools
The assembly leader or crew should ensure the proper complement of tools are on hand to
assemble the Dragon A400. Bend-Tech does not recommend attempting to assemble the
machine without the tools listed in this chapter.
2.1.1 Tool List
The following are the recommended tools needed to uncrate the Dragon A400 and perform the
complete assembly procedure.
• Forklift
• Cordless drill/driver
• T25 bit
• Side cutters
• Tin snips
• Utility knife
• 
• 
• 
• Level (laser, digital or bubble)
• String or laser level (for checking
straightness)
• Ratchet
• 
• 
• ¾ in. socket
• ¾ in. wrench
• ¾ in. deep well socket
• Rubber mallet or Dead Blow plastic
hammer
• Tape measure
• Zip ties
• 
• 