25Bend-Tech Dragon A400
Startup Manual
Maintenance
02
02
Maintenance
2.1 Dragon A400 Maintenance Overview
In order to keep the Dragon A400 running at peak performance, it is important to follow the
maintenance schedule. Following this maintenance schedule will help maximize the machine’s
long-term performance and avoid down time. The plasma cutting process produces dust,
slag, smoke and other contaminants that can build up on Dragon A400 components. If not
maintained, these contaminants can aect the performance of the machine.
The Dragon A400 is a machine which relies on mechanical components to perform its
operations. As with any machine, these components can wear out over time. Maintaining them
is key to maximizing the service life of the machine.
2.2 Daily Maintenance
The Dragon A400 requires specic daily maintenance in order to continue to function like
new. The Operator should set up a Daily Maintenance checklist that includes all of the points
outlined in this section.
2.2.1 Clean the Gate
Use compressed air to blow dust and debris from the rollers, bearings, racks, and other
components of the Gate. Then use brake cleaner to clean the Gate.
To Next Page
Loading...
