Bender CC613 User Manual

CC613 charge controller
Charge controller for use in electric vehicle charging stations, wallboxes or street
light charging points
CC613_D00381_07_M_XXEN/02.2023 Manual EN

Bender CC613 Specifications

General

Brand	Bender
Model	CC613
Category	Controller
Language	English

Summary

General Instructions

Manual Usage and Safety Information

Guide on effective manual utilization and explanation of safety symbols used.

Critical Safety Precautions

Functionality

Intended Use and Device Features

Describes the primary purpose and lists the various features and capabilities of the charge controller.

Functional Description and General Functions

Explains the operational logic and details common functions applicable across different device variants.

Connection

Connection Conditions and Plug Types

Critical safety requirements and details on connection plug types for charging.

Wiring Diagram

Schematic diagram illustrating the electrical connections of the charging system.

Terminal Assignment

Maps device terminals to specific functions and signals for wiring.

Connectivity and Interfaces

Overview of communication capabilities, Master/Slave operation, and available interfaces.

Control and Proximity Pilot Connections

I/O Extension, Emergency Opener, and RDC-M Module

Configuration and Testing

Configuration Methods and Local Setup

Outlines methods for configuring the device via web interface, USB, or PC/tablet.

System Testing and Backend Connectivity

Procedures for testing device operability and establishing backend network connections.

Technical Data

Electrical and Environmental Specifications