Bender CC613 User Manual

Technical data
Other
Operating mode Continuous operation
Mounting position Orientated to front panel; air must pass through cooling slots vertically
Degree of protection IP20
DIN rail IEC 60715
Weight (depends on the variant) max. 500 g
6.1 Declaration of conformity
Bender GmbH & Co. KG hereby declares that the device covered by the Radio Directive complies with
Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet
address:
https://www.bender.de/leadmin/content/Products/CE/CEKO_CC613-4G.pdf
6.2 Standards and approvals
6.3 Ordering information
Type Modem Interface RDC-M External Modbus OCPP-capable PLC* User interface I/O extension Article no. Manual no.
CC613-ELM4PR-M 4G ✓ ✓ ✓ ✓ B94060020
CC613-ELPR-M --- ✓ ✓ ✓ ✓ B94060021
CC613-ELM4PR 4G ✓ ✓ ✓ B94060026
CC613-ELPR --- ✓ ✓ ✓ B94060027
CC613-HEM-X2 ---
Modbus,
Ethernet
✓ ✓
B94060028
D00381
* Powerline Communication acc. to ISO/IEC 15118
The charge controller with residual direct current monitoring module (RDC-M) only works in
combination with a measuring current transformer (to be ordered separately). Dierent cable lengths are
available.
32 CC613_D00381_07_M_XXEN/02.2023

Bender CC613 Specifications

General

Brand	Bender
Model	CC613
Category	Controller
Language	English