Need help?Do you have a question about the Bender CC612 and is the answer not in the manual?
General| Type | Residual Current Monitor |
|---|---|
| Communication | Modbus RTU |
| Protection class | IP20 |
| Rated operational voltage AC | 230 V |
| DC fault current detection | Yes |
How to use this manual. Explains the structure and symbols used in the document for clarity.
Technical support, service, and repair contacts and procedures. Includes first-level support and repair services.
Details warranty terms, liability exclusions, and conditions for claims.
General safety instructions and warnings relevant to Bender products.
Procedures and risks associated with working on electrical installations.
Intended use of the charge controller and potential dangers.
Lists key features and capabilities of the CC612 charge controller.
Provides a general overview of the charge controller's design and variants.
Describes the operational functions and how the charge controller works.
Presents the physical dimensions of the charge controller in millimeters.
Guides on how to mount the charge controller onto a DIN rail securely.
Outlines essential conditions and precautions for connecting the device.
Details various connectivity options and interfaces available on the device.
Explains how to set up Master/Slave communication between charge controllers.
Covers connecting different types of meters like eHZ, Modbus, or SO interface.
Explains local and remote methods for configuring the charge controller.
Lists and describes parameters available in the device's State tab.
Lists and describes parameters available in the device's Settings tab.
Lists and describes parameters available in the device's Operator tab.
Lists and describes parameters available in the device's Manufacturer tab.
Describes the procedure for verifying a successful device boot-up.
Covers testing connectivity to the backend system via various network types.
Explains how to test plug locking and unlocking mechanisms.
Details the process of initiating and managing charging sessions.
Guides on establishing a network connection to the charge controller.
Details the process of using the USB configuration interface for setup.
Presents detailed technical specifications in a tabular format.
Lists standards, approvals, and certifications the product complies with.
Provides the EU Declaration of Conformity for the product.
Lists part numbers and accessories for ordering the charge controller.
To Next Page
