Bender CC612 - Ordering Information

Technical DataTechnical Data
CC612(4G)_D00325_04_M_XXEN/03.2019
44
8.4 Ordering information*
* The charge controller with optional RDC-MD only works in combination with the mea-
suring current transformer, which must be ordered separately. Various cable lenghts
are available (see table below).
** Optional and enabled by a software update
Accessories
** The measuring current transformer has an internal diameter of 15 mm.
Type Modem Meter
RDC-
MD*
PLC**
hardware
User
interface
LEDs Art. No.
CC612 -1M4PR 4G
eHZ, S0
interface
 
Ready
Alarm
PLC
B94060011
CC612 -2M4PR 4G
Modbus, S0
interface
 
Ready
Alarm
PLC
B94060013
CC612 -1S0PR ---
eHZ, S0
interface
 
Ready
Alarm
PLC
B94060005
CC612 -2S0PR ---
Modbus, S0
interface
 
Ready
Alarm
PLC
B94060007
CC612 -2M4R 4G
Modbus, S0
interface
 --- 
Ready
Alarm
B94060015
CC612 -2S0R ---
Modbus, S0
interface
 --- 
Ready
Alarm
B94060010
Type Art. No.
RFID110-L1 with RJ45 cable (length 500 mm) B94060110
RFID114 with RJ45 cable (length 500 mm) B94060114
Measuring current transformer** W15BS ( Cable length 1,500 mm) B98080065
Measuring current transformer** W15BS-02 (Cable length 180 mm) B98080067
Measuring current transformer** W15BS-03 (Cable length 320 mm) B98080068
DPM2x16FP (display module) B94060120