BendPak P-9000LT - Air Valve Connections; Pushbutton Air Valve Fittings

P-9000LT/F Low-Rise Pit Lift 31 P/N 5900022 — Rev. B — Nov. 2019
5. On the underside of the Console Cover, attach the male end of a Compression Elbow Fitting to the
CYL connector on the Pushbutton Air Valve, then connect the final Tubing length to the
compression end of the Elbow Compression Fitting.
6. Also on the underside of the Console Cover, attach the male end of an Air Line Pipe Fitting to the
IN connector on the underside of the Pushbutton Air Valve, then connect the customer-supplied air
supply to the other end of the Air Line Pipe Fitting.
Pushbutton is above the Console Cover, all other components are under the Console Cover. Drawing
not necessarily to scale. Not all components shown.