To Next PageTo Next Page
Need help?Do you have a question about the BendPak P-9000LT and is the answer not in the manual?
General| Brand | BendPak |
|---|---|
| Model | P-9000LT |
| Category | Lifting Systems |
| Language | English |
Identifies the specific lift models covered in the manual.
Outlines the responsibilities of the product owner for safe operation and maintenance.
Section for recording unit details like model, serial, and date of manufacture.
Provides an overview of the P-9000LT/F lift, its applications, and ALI certification.
Critical safety warning regarding installation, operation, and repair hazards.
Instructions for inspecting shipments and handling potential damage or missing items.
Provides essential safety guidelines for operating, maintaining, and using the lift.
Lists and describes the main components of the P-9000LT/F lift.
States BendPak's disclaimer for damages resulting from product misuse or modifications.
Explains the function of hydraulic cylinders in raising and lowering the lift platforms.
Describes how safety locks hold the platforms in place when raised.
Explains the role of air cylinders in disengaging safety locks.
Details the rubber blocks that contact the vehicle's lifting points.
Mentions optional lift arms for increased lifting capability.
Answers the question about the lift's weight capacity.
Clarifies what 'flush mount' means for the P-9000LTF model.
Explains the term 'pit lift' and its application in oil-change facilities.
States that the lift is approved for indoor use only.
Details the flexibility in positioning the console relative to the lift.
Addresses the question about raising vehicles exceeding the lift's capacity.
Specifies the number of locking positions available on the lift.
Explains how safety locks secure the platforms.
Clarifies that vehicles can be driven on from either direction.
Defines what 'frame-engaging' means in the context of the lift.
Illustrates the lift with labeled dimensions A through G.
Provides a detailed comparison of specifications between the P-9000LT and P-9000LTF models.
Critical safety rules to follow specifically during the lift installation process.
Outlines the electrical requirements and the need for a licensed electrician.
Lists the necessary tools for installing the lift.
Provides guidance on choosing a suitable installation location for the lift.
Details the requirements for the concrete floor installation.
Specifies the electrical power and operating temperature ranges for the lift.
Advises on appropriate attire during installation and operation.
Provides specific instructions for preparing concrete cutouts for flush-mount installation.
Details the specific dimensions required for P-9000LTF concrete cutouts.
Instructions for creating chalk lines to ensure accurate lift placement.
Guidance on positioning the lift frames correctly based on chalk lines.
Specifies concrete requirements for anchoring the bases.
Lists the specifications for the anchor bolts used in installation.
Instructions for inserting and torquing anchor bolts into the prepared holes.
Detailed steps for assembling the console and mounting the power unit.
Instructions for anchoring the assembled console to the floor.
Detailed steps and diagrams for routing the hydraulic hoses correctly.
Specific instructions for connecting hydraulic hoses for 110 VAC power units.
Details how to connect hoses to the flow divider for the 110 VAC setup.
Instructions for attaching hydraulic hose assemblies to elbow fittings.
Details connecting fittings to the pushbutton air valve for air supply.
Steps for physically mounting the raise and lower buttons onto the console cover.
Critical safety warnings and requirements for electrical connections.
Specific steps for connecting to a 208-240 VAC power source.
Importance and installation guidance for a power disconnect switch.
Importance and installation guidance for a thermal disconnect switch.
Discusses the importance of preventing hydraulic fluid contamination and cleaning procedures.
Provides methods for cleaning hydraulic hoses and fittings before use.
Offers additional steps to keep the hydraulic system clean.
Lists the types of fluids approved for use in the lift's hydraulic system.
Steps to test the lift's functionality and bleed air from the hydraulic system.
Advice on what to do if the lift shakes, moves erratically, or squeaks.
Discusses and provides solutions for issues when raising a vehicle with no wheels.
Instructions on how to install the ramps for the P-9000LT model.
A final check to ensure all installation steps are complete before operating the lift.
Emphasizes critical safety precautions before operating the lift.
Lists essential checks for the lift, area, operators, and vehicle before use.
Explains the function of the Safety Lock Release, Raise, and Lower buttons.
Explains the dual functions of safety locks: securing platforms and allowing adjustable height.
Details the three positions of the lock bar relative to the safety locks.
Step-by-step instructions on how to safely position and raise a vehicle using the lift.
Stresses the importance of using manufacturer-recommended lifting points for vehicles.
Describes how to engage the platforms onto the safety locks.
Step-by-step instructions on how to safely lower a vehicle from the lift.
Details the capacity reductions when lift arms are extended beyond a certain point.
Instructions for installing the lift arms and safety stop bushings.
Outlines routine maintenance checks based on frequency.
Recommends periodic checks of electrical components by an electrician.
Addresses issues where the lift's platforms fail to move up or down.
Explains potential causes and solutions for platforms slowly lowering.
Discusses and provides solutions for issues when raising a vehicle with no wheels.
Provides electrical wiring diagrams for the lift's power unit.
Explains US and European wire color coding for electrical connections.
Highlights labels providing operating instructions and safety warnings.
Shows labels indicating ALI, MET certifications and product data.
Displays and explains important general warning labels for the lift and kit.
Provides a diagram and list of parts for the lift's main components.
Lists parts specific to the right-hand ramp assembly.
Lists parts specific to the left-hand ramp assembly.
Lists parts for the short power unit console assembly.
Lists the various components found in the lift's parts box.
