PART SPECIFICATION FORM (STANDARD)
5900951
MRP Description:
XPR-10S SERIES INSTALLATION MANUAL
04/16/2021
---
1. Engineering Specification
Application:
INSTALLATION MANUAL
Print Settings for BendPak Manuals
Unless otherwise specified, use these settings for printing
BendPak manuals:
A4 (210 to 297 mm), 8.5 by 11
inches (216 to 279 mm), or between
100 to 120 gsm (27 to 32 pound),
uncoated
2. Vendor Information (Or for Reference)
Approved Vendor
Vendor Part # Contact # Preferred Vendor
1)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT